Verilink HDM 2180 (880-503048-001) Product Manual - Manual (Page 26)

Standalone HDM 2180 Management
3-2 Verilink HDM 2180 User Manual
Figure 3-1 ASCII Screen: Main Menu via HDM 2180 Local Port
Table 3-1 HDM 2180 Craft Interface Menu Commands
Command Description
P Performance—displays the Performance Monitoring Menu. Figure 3-9 , Table 3-9 .
D Diagnostics—displays the Diagnostics Menu. Figure 3-6 , Table 3-6 .
C Port Configuration—displays the Port Configuration Menu, Figure 3-3 , Table 3-3 .
O Node Administration—displays the Administration Menu, Figure 3-2 , Table 3-2 .
B Restore Manufacturing Default Config—displays the Restore Manufacturing Default
Config Menu, Figure 3-14 , Table 3-11 .
R Monitor Alarms—displays the Alarm Monitoring display that provides real-time alarm
notification, Figure 3-15 .
A View Alarm Buffer—displays the Alarm Buffer Screen that provides a historical record of
alarms up to the time of selection, Figure 3-16 .
W Change Craft Password—displays field in which to change craft password:
HDM > w
Old Password:
New Password (4-20 chars):
Type New Password again:
Password Changed.
-- VERILINK HDM 2180 CRAFT INTERFACE at[1,1]: FW Rev 3.3, Dec. 12, 1997 -- -- VERILINK HDM 2180 CRAFT INTERFACE at[1,1]: FW Rev 3.3, Dec. 12, 1997 -- -- VERILINK HDM 2180 CRAFT INTERFACE at[1,1]: FW Rev 3.3, Dec. 12, 1997 -- -- VERILINK HDM 2180 CRAFT INTERFACE at[1,1]: FW Rev 3.3, Dec. 12, 1997 --
Near End Location ID : Near End Location ID : Near End Location ID : Near End Location ID :
Far End Location ID :
Far End Location ID : Far End Location ID : Far End Location ID :
Ds3 Node Address : 127.255.255.0
Ds3 Node Address : 127.255.255.0 Ds3 Node Address : 127.255.255.0 Ds3 Node Address : 127.255.255.0
Ds3 Acp Backplane Bus : C
Ds3 Acp Backplane Bus : C Ds3 Acp Backplane Bus : C Ds3 Acp Backplane Bus : C
Ds3 Acp Inband : Enabled
Ds3 Acp Inband : Enabled Ds3 Acp Inband : Enabled Ds3 Acp Inband : Enabled
Loopback Status : No Loopback
Loopback Status : No Loopback Loopback Status : No Loopback Loopback Status : No Loopback
--- MAIN MENU --- --- MAIN MENU --- --- MAIN MENU --- --- MAIN MENU ---
P) performance P) performance P) performance P) performance
D) diagnostics
D) diagnostics D) diagnostics D) diagnostics
C) port configuration
C) port configuration C) port configuration C) port configuration
O) node administration
O) node administration O) node administration O) node administration
B) restore manufacturing default config
B) restore manufacturing default config B) restore manufacturing default config B) restore manufacturing default config
R) monitor alarms
R) monitor alarms R) monitor alarms R) monitor alarms
A) view alarm buffer
A) view alarm buffer A) view alarm buffer A) view alarm buffer
W) change craft password
W) change craft password W) change craft password W) change craft password
T) change craft timeout length
T) change craft timeout length T) change craft timeout length T) change craft timeout length
X) system log off
X) system log off X) system log off X) system log off
HDM > HDM > HDM > HDM >
Menu Heading Area
Module Status
Command List
Command/Data Entry Area