Verilink FrameStart FSD (34-00291.F) Product Manual - Manual (Page 43)

O p e r a t i o n 37
E1 DTE Configuration
This menu establishes the necessary parameters for connection with the DTE.
DTE Clock
The polarity of the clock is either normal or inverted.
TXCC Clock
This is used to enable or disable generation of the TXCC clock from the unit
to the DTE.
DTE Data
In the invert mode, transmit and receive data are inverted at the port interface.
This function can be used as a means of guaranteeing ones density when the
data is composed of SDLC- type protocols. The default setting is normal.
CTS
Setting this field to Forced On allows the forcing of the port control lead
output state. Normal allows for normal operation where CTS follows the
transition of RTS.
DCD
Setting this field to Forced On allows the forcing of the port control lead
output state. Normal allows for normal operation.
DSR
Setting this field to Forced On allows the forcing of the port control lead
output state. Normal allows for normal operation.
DTR
Setting this field to Forced On allows the forcing of the port control lead
output state. Ignored allows for normal operation.
Frame Relay Configuration
The frame relay configuration screen allows performing the configuration and
control of the frame relay parameters.
LMI Mode
Sets the operating mode for FrameStart. The choices are as follows. ON
discovers the LMI Type and sources LMI to the network. MON (Monitor