Verilink FrameStart FSD (34-00291.F) Product Manual - Manual (Page 25)

G e n e r a l O p e r a t i o n a n d C o n v e n t i o n s 19
Menu Title
The menu title shows the general classification for a group of accessible
functions.
Menu Element
The menu element is a menu or submenu accessible by pressing the SELECT
button. When selecting a menu element, it becomes the menu title and the
next lower level in the hierarchy becomes the menu element.
Information Element
The information element is a user-selectable field allowing changes to the
setting. To access the information elements, press the SELECT button until
the desired option is displayed. From this point, EXIT goes back to the menu
title; SCROLL goes to the next menu element. Scroll through the available
menu elements by pressing the SCROLL button. Press the SELECT button to
change information elements.
Cursor Elements
The cursor appears on the left side of the “selected” information element (see
Figure 3.3).
Move the cursor to the right by choosing SELECT. Use the SCROLL button
to change field elements (i.e.: 0, 1, 2…). Press EXIT to escape without
changing the information field.
NOTICE: Every time the EXIT button is pressed, the cursor returns to the next
highest level in the menu hierarchy.
Hardware Reset
To execute a hardware reset, press the SELECT and EXIT buttons while
applying power to the unit and hold them for five seconds. A hardware reset
restores the unit to factory default settings just like a Restore Factory Settings.
The following screen (Figure 3.4) appears as the unit comes out of hardware
reset.
Utilities
The Utilities screen allows performing various functions such as viewing
revision numbers, restoring factory settings, and establishing a password.
FRAME START DDS
***UNIT RESET***
Figure 3.4 DDS CSU/DSU Hardware