Verilink FrameStart FSD (34-00291.F) Product Manual - Manual (Page 18)

12 F r a m e S t a r t D D S C S U / D S U a n d T 1 C S U / D S U a n d F r a m e S t a r t F S E
inspection. Verilink will arrange for repair or replacement without waiting for
claim settlement.
Supplied Materials
The FrameStart family of products are shipped from the factory with the
following standard equipment:
• AC power supply for the DDS and T1 CSU/DSU,
DC power supply for the FrameStart FSE (see Figure 2.3 on page 15)
• Reference manual
• 8-pin to 8-pin network cable (p.n. 9 -1544 -009)
• RJ48 to BNC adapter (for FrameStart FSE)
Rear Panels
The rear panel of the DDS and T1 CSU/DSU are identical as shown in Figure
2.1.
Figure 2.1 DDS and T1 CSU/DSU Rear Panel
The rear panel of the FrameStart FSE is shown in Figure 2.2.
Figure 2.2 FrameStart FSE Rear Panel