Events, Events -6 – Verilink AS100 (896-502379-001) Product Manual User Manual
Page 72
5-6
Access System Centum Series User Manual
Events
Centum Series constantly monitors for the occurrence of events, such as
alarms, test commands, and system resets. When an event occurs, a
description with a time and date stamp is immediately sent out the printer
port. The format and interpretation of printed events are shown on the
next page.
In addition, Centum Series maintains a log of the most recent sixteen
events and that log can be accessed by either the front panel controls and
LCD panel or an externally attached terminal. See page 6-15 for terminal
access of the Event Log.
From the Event Log Main Menu,
SELECT
then use
UP/DOWN
arrows to
view the stored events and/or clear the log. (The log is cleared is
SELECT
is depressed when the screen displays Clear Event Log.) The
format of an LCD screen event is below. Interpretation of the events is
the same as shown on the next page for printed events.
NN is the Event sequence number. S indicates that the Event is the Start
of an occurrence. E is used to indicate that the Event is the End of an
occurrence.
NN S Event Description
HH:MM:SS MM/DD