Checking the “t-channels, Checking the “t-channels” -18 – Verilink AS100 (896-502379-001) Product Manual User Manual
Page 43

Checking the “T-Channels”
Access System Centum Series User Manual
3-19
Checking the “T-Channels”
Repeatedly depress
UP
or
DOWN
while comparing Centum Series display
with the checkmarks in the worksheet T-Channel Definitions, columns
#14 and 27.
Note that “Idle” refers to channels that have been configured as “Not
Used” in the Centum Series. In some cases, typically involving
Fractional T1, a portion of the DS0s assigned to the DSX-1 port will be
forced to “idle” by the PBX; these channels will be displayed as “DSX-1”
Main Menu HH:MM
_Configuration
Main Menu,
/DOWN
to
display:
Configuration
_NI Interface
SELECT
to display:
Configuration
_DS0 Assignments
DOWN
as
required to
display:
Channel Mode
_01: XXXX
SELECT
to display:
This manual is related to the following products: