Serial port bert, Serial port bert -12 – Verilink AS100 (896-502379-001) Product Manual User Manual
Page 64
4-12
Access System Centum Series User Manual
Serial Port BERT
The Serial Port (DTE) BERT can be used as a part of many different test
configurations. It is most valuable with both the Local and Remote Serial
Port Loops activated (see page 4-10); the local end of the recommended
configuration is shown below.
The “Local” Errored Seconds are counted by the detector toward the left
side in the figure. The “Remote” Errored Seconds are counted by the
detector toward the right side.
WHEN TESTING IS COMPLETED, BE SURE TO TURN THE LOOP AND
BERT “OFF”.
Diagnostics
_Serial Port #1 (or 2)
iag. Menu,
/DOWN
to
display:
SP 1 (or 2) Diagnostics
_BERT.....: On
SELECT
to
display:
SP 1 (or 2) Diagnostics
_Loc ES...:_
∅∅∅∅∅
DOWN
and
SELECT
as
to display:
SP 1 (or 2) Diagnostics
_Rem ES...:_
∅∅∅∅∅
DOWN
and
ELECT
as
to display:
SP 1 (or 2) Diagnostics
_Sec/Test.:_
∅∅∅∅∅
DOWN
and
SELECT
as
to display: