Verilink AS100 (896-502379-001) Product Manual - Manual (Page 101)

Access System Centum Series User Manual B-1
Appendix
B
Standard Cabling for User Ports
Network Interface and DSX-1 Por
The Network Interface and the DSX-1 Port both use an 8-pin modular
jack in an RJ-48 configuration. The figures to the right show the pin
numbering and the pin assignments of the two jacks. Verilink cables are
recommended:
Network Interface Cable. Eight-position, 8-pin male/male modular
cable (RJ-48 configuration). Used for connecting the NI port to the
supplier’s network interface. Fifteen feet long. One cable supplied with
unit. Additional cable optional at extra cost.
Figure B-1 Network Interface and DSX-1 Port (RJ-48)
Pin Signal
To/From
Access System
100
1 Receive To
2 Receive To
3 Not Used -----
4 Transmit From
5 Transmit From
6 Not Used -----
7 Optional Shield Ground -----
8 Optional Shield Ground -----
1 2 3 4 5 6 7 8