Requirements, Software and hardware, Power and environmental – Verilink AS100 (896-502379-001) Product Manual User Manual
Page 26: Centum series worksheet, Requirements -2, Centum series worksheet -2, Centum series workshee
Configuring and Installing the Centum Series
3-2
Access System Centum Series User Manual
Requirements
Listed below are the requirements for operating Centum Series units.
Software an
hardware
Each Centum Series product is a self-contained unit that can be
configured with no additional software or hardware.
This chapter describes the steps necessary to configure, test, and install
Centum Series using the front panel buttons and LCD panel. The same
steps can be more easily performed using a customer-supplied external
terminal (or PC with terminal emulation software). See Chapte r6,
Auxiliary Ports , page 6-8.
Power and
environmental
Centum Series uses 110-120 VAC, 60 Hz, at 0.25 amps.
Centum Series does not require a conditioned environment but should be
operated in areas with adequate ventilation.
Centum Series Workshee