Verilink AS100 (896-502379-001) Product Manual User Manual
Page 32

Configuring and Installing the Centum Series
3-8
Access System Centum Series User Manual
Yes MUST be chosen if the network supplier is a common carrier,
such as a telephone company. If the network is private, the selection
is a user option.
10.
ESF Reporting Format. This entry describes the types of ESF
network commands that the Centum Series will respond to. It has no
meaning for D4 networks: see Framing (item #4, above). With ESF
networks, this information must be obtained from the network
supplier.
Repeatedly
SELECT
to choose between AT&T Technical Reference
54016 and ANSI specification T1.403.
11.
Clear Registers. Repeatedly
SELECT
to choose between Yes and
No. Yes is the recommended choice.
When commanded by the network supplier, Centum Series will
transmit stored error information to the supplier.
A Yes entry will cause Centum Series to clear all error counts when
the unit is powered down and back up again.
A No entry will allow potentially invalid registers in preparation for
transmission to the network supplier.
NI Configuration
ESF Frmt:_XXX
DOWN
to
display:
NI Configuration
Clear Regs:_XXX
DOWN
to
display: