A.2. vel- 3 a / v – Thinklogical X4 and Touchpanels User Manual
Page 43
![background image](https://www.manualsdir.com/files/807745/content/doc043.png)
®
V e l o c i t y D V I E x t e n d e r P r o d u c t M a n u a l , R e v . H , D e c .
2 0 1 4
Page 41
A.2. VEL- 3 A/V+
Receiver VEL-AV0M03-LCRX
CPU
Primary DDC Port
Power Supply
(PWR-000022-R)
Power Supply
(PWR-000022-R)
Digital Video Extender-3AV+ Installation Overview
Velocity
dvi
STEP 5:
Connect the video source (CPU) to
the Tx with a DVI-D M-M Cable. An optional
local display can also be connected using a
DVI-D M-M Cable. Connect the Audio IN and
OUT and Serial sources to the Tx with standard
copper cables
5
4
2
STEP 2:
Connect the supplied
AC Power Adapter (PWR-
000022-R) to the Rx and plug it
into a standard AC source.
3
STEP 3:
Connect the DVI to Display DDC
port to a video monitor (or projector or other
viewing device) with a DVI-D M-M Cable. A
second device can be installed at the DVI to
Display port using a similar cable. Connect
the audio and serial devices with standard
copper cables. Turn all the devices ON.
1
STEP 1:
Connect multi-mode fiber optic cables
(up to 1000 meters) between the Rx and Tx units.
L1: Data Tx to Rx & Video
L2: Data Rx to Tx
STEP 4:
Connect the supplied AC Power
Adapter (PWR-000022-R) to the Tx and
plug it into a standard AC source.
L1
L2
L2
L1
Local
Monitor
DVI OUT
DVI OUT
DDC
Transmitter VEL-AV0M03-LCTX
RJ45 to
DB9
RJ45 to
DB9
External RS-232 or RJ45 Device