beautypg.com

Thinklogical Velocitykvm-34 Quick Start Guide User Manual

Velocity kvm-34, Quick start guide, Multi-mode fiber extension – four dvi displays

background image

100-240V-,0.5A, 50/60 Hz

T 2A ,250VAC

CAUTION! Replace with same type and rating fuse.

CNTRL

LINE OUT

HOST

USB HID

U

P

D

A

T

E

S

PWR

FOL

USB 2.0

SER IAL PORT

DVI OUT 1

DVI OUT 2

DVI OUT 3

DVI OUT4

STEP 6: Four DVI-D cables (CBL-000009-002MR) are

included. Connect one each to the CPU’s DVI 1, 2, 3 and 4

Video Cards and the other ends to the VelocityKVM

Transmitter’s DVI IN 1, 2, 3 and 4 ports.

UPDATES

DEV

DVI IN 2

DVI IN 4

DVI IN 3

DVI IN 1

SER IAL PORT

L2

L3

LINE IN

MIC OUT

HID

P

S

2

P

S

2

LOCAL

FROM CPU

U S B 1 .1

U S B 1 .1

USB HID

HOST

CNTRL

CAUTION! Replace with same type and rating fuse.

100-240V-,0.5A, 50/60 Hz

T 2A ,250VAC

CLINK

PWR

CP

FOL

6

4

3

USB 2.0
Audio OUT►

Audio IN◄

PS/2 Keyboard
PS/2 Mouse
USB HID (Kybd/Mouse)

USB 1.1 (Kybd/Mouse)

PS/2

Kybd/

Mouse

USB

HID

USB 1.1

8


Audio
OUT

5

2

3

VelocityKVM-34 Transmitter

VelocityKVM-34 Receiver

STEP 7: If desired, connect your local
keyboard and mouse by inserting the PS/2 or
USB HID connectors into the VelocityKVM
Transmitter’s local devices receptacles.

STEP 4: Connect your Multi-Mode Fiber Optic cables
between the Transmitter and Receiver units. Connect:

STEP 1: Ensure that the POWER
ON/OFF switch is in the OFF
position (0) on both the Tx and Rx
units. Connect the supplied AC
Power Cords to both units and plug
them into a standard AC supply.
LEAVE BOTH SWITCHES IN THE
OFF POSITION.

STEP 5: Connect
your KVM devices
to the CPU using
the cables supplied
in KIT-000005-R.

STEP 3: Turn the
Receiver unit ON (1).

STEP 2: Connect your desktop

devices (monitors, keyboard,

mouse, etc.) to the Receiver

using standard cables.

Each Thinklogical™ Velocity

kvm-34

Multi-Mode Fiber Optic System consists of a transmitter unit and a receiver unit connected by five multi-

mode fiber optic cables. The transmitter unit connects to the computer with standard cables and the receiver unit provides connections to the user
interface devices. The Velocity

kvm-34

supports PS/2, full duplex stereo audio, serial (RS-232), USB 1.0 (HID) device ports and USB 1.1. USB

2.0 (high speed up to 480Mbps) is optional.

Note: Be sure to

leave adequate ventilation

space on both sides of the

units (2” minimum),

especially if the units are

being stacked

CONTENTS
Upon receiving your Thinklogical
Velocity

kvm-34

Extender, you

should find the following items:

7

Local PS/2

Connectors

Local USB HID
Connectors

9

STEP 9: Turn on the Source
(CPU) last. Verify that all
system features are
functioning properly.

Visit us online at

www.thinklogical.com

for more

product information, current updates and the
complete line of Thinklogical™ products.

TM

MIC IN

Copyright c 2009. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.

8 Mounting bracket

screws

Fo ur Head S in gl e Li nk

Velocity

kvm-34

Fi ber Opt ic Tran smitt er

2 Mounting bracket screws

in four places.

RACK-MOUNT OR DESK-TOP
OPTIONS: Like all

KVM extenders, the

Velocity

KVM-34

can be mounted in a standard EIA 19"
rack or on a shelf or desk-top.

Velocity

kvm-34

L1

L4

L5

L5

VelocityKVM Extender Transmitter
VelocityKVM Extender Receiver
2 AC power cords, PWR-000006-R

(International connections may differ.)

VelocityKVM Extender Cables:

4 DVI-D Male Cables, 2 meters, CBL-000009-002MR
1 Cable Kit (8 six ft. peripheral cables.) KIT-000005-R

VelocityKVM Extender Product Manual

All physical connections to the product use industry-standard connectors.

STEP 8: Turn the
Transmitter unit ON (1).

L1/Tx to L1/Rx, L2/Tx to L2/Rx, L3/Tx to L3/Rx, L4/Tx to L4Rx
and L5/Tx to L5/Rx.

Multi-Mode Fiber-Optic
Cable Guide:

L1: Data Tx to Rx and Video 1
L2: Data Rx to Tx
L3: Video 2
L4: Video 3
L5: Video 4

QUICK START

GUIDE

Multi-Mode Fiber Extension – Four DVI Displays

PS/2 or USB
connectors

L2

L3

L1

L4

Audio IN►

5

1

DVI

Display 1

2

3

4

Each mounting bracket is secured

by four screws and can be safely

removed from the transmitter or

receiver unit for desk-top mounting

after power has been removed from

the unit.

L1

L2

L3

L4

L5

PHONE:

(800) 291-3211

WEBSITE:

www.thinklogical.com

EMAIL:

[email protected]

VELOCITY-34_Quick_Start_Rev_C