Thinklogical DVI Splitter/Distribution Amp Single Link 1:2 Quick Start Guide User Manual
Dvi splitter sl distribution amp 1:2, The logical solution, The models
DVI IN
DVI OUT 1
DDC
DVI OUT 2
POWER
5VDC
The Future of Access and Control
DVI Splitter
SL Distribution Amp 1:2
+
DVI OUT 1
DDC
DVI OUT 2
DVI OUT
Source
CPU
5VDC
Power
Supply
2
STEP 2:
Connect the 5VDC Power
Supply (PWR-000022-R) to the INPUT
POWER JACK located on the front
panel of the VDA Splitter’s chassis
and plug it into a standard AC source.
3
STEP 3:
Connect one end
of the Single-Link DVI-D
male to male cable to the
video source (DVI-D video
card) and the other end to
the DVI IN connector on
the VDA Splitter. Ensure
all video output displays
are functioning properly.
1
STEP 1:
Connect one end of a Single-Link DVI-D
male to male cable from your Primary Output
Monitor to the DVI OUT 1 DDC connector on the
VDA Splitter’s front panel. Connect one end of a
Single-Link DVI-D male to male cable from your
Secondary Output Monitor to the DVI OUT 2
connector.
PHONE: 1-800-291-3211
WEBSITE: www.thinklogical.com
EMAIL: [email protected]
Visit us online at
www.thinklogical.com
for more product information, current
updates and the complete line of Thinklogical
™ products.
Copyright © 2010. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
VDA Series DVI Splitter
Single-Link 1:2
QUICK START GUIDE
The Logical Solution
The
VDA-1
1:2 Splitter from Thinklogical
™ sends a
video source to two displays without signal loss.
Installation is plug-and-play with no adjustments
required. Each model is also compatible with most
Thinklogical™ DVI Extenders.
The Models
VDA-1 (SL 1:2)
distributes single-link DVI to 2
single-link displays.
VDA-2 (SL 1:4)
distributes single-link DVI to four
single-link displays.
VDA-3 (DL 1:2)
distributes dual-link DVI to two
dual-link displays.
VDA_Splitter_SL_1x2_Quick_Start_Rev_A
When you receive your
Single-Link 1:2 VDA Series
DVI Splitter you should
find the following items:
·
Single-Link M-M, 2 meter
DVI Cable (2)
·
AC/DC Adapter
·
Quick Start Guide