Thinklogical DVI Splitter/Distribution Amp Single Link 1:4 Quick Start Guide User Manual
Quick start guide, Vda series dvi splitter, Single-link 1:4
DVI OUT 4
DVI OUT 3
DVI OUT 2
DVI OUT
Source
CPU
5VDC
Power
Supply
2
STEP 2:
Connect the
5VDC Power Supply
(PWR-000022-R)
to
the INPUT POWER
JACK located on the
back panel of the
VDA Splitter’s chassis
and plug it into a
standard AC source.
3
STEP 3:
Connect one end of the Single-Link
DVI-D male to male cable to the video source
(DVI-D video card) and the other end to the DVI
IN connector on the VDA Splitter. Ensure all
video output displays are functioning properly.
1
STEP 1:
Connect one end of a Single-
Link DVI-D male to male cable from your DVI
Output Monitor 1 to the DVI OUT 1 DDC connector on the
VDA Splitter’s front panel. Likewise, connect one end of a
Single-Link DVI-D male to male cable from your DVI OUT
Monitors 2, 3 & 4 to the DVI OUT 2, 3 & 4 connectors.
PHONE: 1-800-291-3211
WEBSITE: www.thinklogical.com
EMAIL: [email protected]
Visit us online at
www.thinklogical.com
for more product information, current
updates and the complete line of Thinklogical
™ products.
Copyright © 2010. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
VDA Series DVI Splitter
Single-Link 1:4
QUICK START GUIDE
The Logical Solution
The
VDA-2
1:4 Splitter from
Thinklogical
™ sends a DVI video
source to four displays without
signal loss. Installation is plug-and-
play with no adjustments required.
Each model is also compatible with
most Thinklogical™ DVI Extenders.
The Models
VDA-1 (SL 1:2)
distributes single-link
DVI to 2 single-link displays.
VDA-2 (SL 1:4)
distributes single-link
DVI to four single-link displays.
VDA-3 (DL 1:2)
distributes dual-link
DVI to two dual-link displays.
VDA_Splitter_SL_1x4_Quick_Start_Rev_A
DVI OUT 1
DDC
DVI OUT 2
DVI OUT 3
DVI OUT 4
The Future of Access and Control
DVI Splitter
SL Distribution Amp 1:4
+
DVI IN
POWER
5VDC
DVI OUT 1
DDC
VDA DVI Splitter 1:4 back panel
VDA DVI Splitter 1:4 front panel
When you receive your
Dual-Link 1:4 VDA Series
DVI Splitter you should
find the following items:
·
Dual-Link M-M, 2 meter
DVI Cable (3)
·
AC/DC Adapter
·
Quick Start Guide