Thinklogical SDIXtreme 3G+ Single Model Quick Start Guide - Manual

OUT
OUT
IN
SD A
C
TI
VE
SD H
D
H
D
3G 3G
▼
▼
PWR
RS422
3G SDI Fiber Optic Extension
RECEIVER
SDI Xtreme 3G+
SDI-C100X1-LCRX
COPY
IN
OUT
A
C
TI
VE
SD H
D
3G
▼
▼
PWR
RS422
3G SDI Fiber Optic Extension
TRANSMITTER
SDI Xtreme 3G+
SDI-L100X1-LCTX
LOOP OUT
COPY
5VDC (PWR-000051-R)
Fiber Optic Cable
Fiber Optic Cable
SDI Xtreme
3G SDI Fiber Optic Extension
3G+
3G, SD, HD SDI Source
3G, SD, HD SDI
Loop Out
3G, SD, HD SDI
Destinations
To UPSTREAM
Receive Port
From DOWNSTREAM
Transmit Port
SDIXtreme3G+_Single_VX160_Quick_Start_Rev_A
5VDC (PWR-000051-R)
Source
Destinations
2
3
STEP 1: Connect your
Fiber Optic Cable from the
SDI Xtreme Receiver IN Port to
a Router Transmit Port or directly
to the Transmitter OUT Port,
depending on your application. If
using RS422, a second, back-
channel fiber, is required.
4
STEP 4: Connect your Fiber
Optic Cable from the
SDI Xtreme Transmitter
OUT Port to a Router
Receive Port or directly to the
Receiver IN Port, depending
on your application. If using
RS422, a second, back-
channel fiber, is required.
5
STEP 5: Install the provided
+5VDC power supply to the
SDI Xtreme Transmitter
and plug it into a standard
AC source. Ensure that the
ACTIVE LED on the
Transmitter comes on. The
ACTIVE LED will blink if no
SDI input is present.
3G+
6
STEP 6: Connect your 3G, SD or HD SDI video
source to the SDI
Xtreme Transmitter’s IN
Port. A local Monitor or other viewing device
may be connected to the Transmitter’s LOOP
OUT port. If required,
connect the device’s
RS422
port to the Transmitter’s RS422 Port,
located directly below the Power connector.
STEP 7: Ensure that the 3G, SD or HD LEDs are illuminated (depending
on your signal type). These indicate that the connections are sound.
SFP OUT (Transmitter) SFP IN (Receiver)
QUICK START GUIDE
PHONE: 1-800-291-3211
WEBSITE: www.thinklogical.com
EMAIL: [email protected]
Visit us online at www.thinklogical.com for more product information, current updates and
the complete line of Thinklogical
™ products.
Copyright © 2010. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
3G+
3G+
1 2 3 4
1 2 3 4 5 6 7
Multi-Mode fiber can be up
to 1000 meters in length.
Single-Mode fiber can be up
to 40 kilometers.
Fiber Optic Cable
KVM Matrix Switch
VX 160
router
3G+
STEP 3: Install your HD, SD or
3G SDI destination devices to the
SDI
Xtreme Receiver’s OUT
Ports. If using RS422, connect
your device to the Receiver’s
RS422 port (located directly below
the Power Connector).
3G+
STEP 2: Install the provided +5VDC power supply to the
SDI Xtreme Receiver and plug it into a standard AC source.
Ensure that the ACTIVE LED on the Receiver comes on.
3G+
RS422
RS422
1
To DOWNSTREAM
Receive Port
From UPSTREAM
Transmit Port
16 Rack Units, 850 Watts
7