Thinklogical RS232-422 Q-Series Extender Quick Start Guide User Manual

Quick start guide

Network Hub

STEP 1:

If using a KVM Matrix Router, connect the RS232/

RS422 Extenders on the Receive side to the router using
multi-mode fiber-optic cables (up to 1000 meters). Connect

to any Router SFP’s Receive Port and

to the same

SFP’s Transmit Port.

STEP 2:

If using a Stand-Alone Chassis (VQS-001300),

ensure the ON/OFF switch is in the OFF (0) position. Insert
the AC power cord and plug it into a standard AC source.
Turn the unit ON.

STEP 3:

Using CAT5 Cables, connect any RS232 or RS422

devices or sources to the modules’ RJ45 ports as needed.

STEP 4:

Connect the RS232/RS422 Extenders

on the Transmit side to the router using multi-
mode fiber-optic cables (up to 1000 meters).
Connect

to any Router SFP’s Receive Port

and

to the same SFP’s Transmit Port.

STEP 5:

If using a Q-4300 Chassis (VQS-004300), ensure

that the ON/OFF Switches on the front panel are both in the
OFF position. Install the Right Power Supply Module AC
Power Cord (left receptacle) and the Left Power Supply
Module AC Power Cord (right receptacle). Plug both cords
into a standard AC source. On the front of the chassis, turn
ON the Right and Left Power Supply Modules.

STEP 6:

Using CAT5 Cables, connect any RS232 or RS422

devices or sources to the modules’ RJ45 ports as needed.

STEP 7:

If using a KVM Matrix Router, connect the

Controller Card’s LAN Port to your Controller CPU with a
CAT5 cable. (CPU IP address: 192.168.13.9)

STEP 8:

Ensure the ON/OFF switch located above the

Router’s Power Supply’s AC receptacle is in the OFF
position. Connect the supplied AC Power Cord and plug it
into a standard AC source. Turn the switch ON.
Verify that all system functions are operating properly.

External Control CPU

Router KVM

Matrix Switch Chassis
MXR-000048
3 Rack Units, 200 Watts

Controller Card
IP Address: 192.168.13.15

Stand-Alone Chassis

VQS-001300

TX: Serial Data ►
RX: Serial Data ◄

RS232/RS422

RS232/RS422 Extenders

RSM-000002-LC

RS232-422_Extender_MX48_QSG

Q-4300 Chassis

VQS-004300

RS232/RS422 Extenders

RSM-000002-LC

RS232/RS422 Extender Module

QUICK START GUIDE

Complete Steps 1-8 to connect your RS232/RS422 Extender Modules

SFP