Erasing many songs at one time, Song information, Other song operations – Teac DP-01 Series Owners Manual User Manual
Page 19: Starting out with your dp-01

Starting out with your DP-01
TASCAM DP-01
Owner’s Manual
19
Managing your songs
Erasing many songs at one time
You may want to select a number of songs for erasing.
This method of
working applies to
a few other operations (copying,
etc.) as well.
…
Use the wheel to scroll up and down through the list of songs.
…
Select a song for erasing using the
INSERT
key. A check mark (✔)
appears by the song title.
…
De-select a song by using the
SHIFT
ed
INSERT
(
DELETE
) key. The
check mark disappears.
…
Press
ENTER
when you have selected all the songs to be erased. You are
asked if you are sure. Press
ENTER
again to erase them, or
EXIT
to exit
the process without erasing them.
You can erase all the songs shown, and a new song is automatically cre-
ated. There is always at least one song on the partition.
Song information
It’s easy to see the title, working partition, and amount of time left for recording
from the “home screen”.
…
From the home screen, press and hold the
EXIT
key. While you hold
down the
EXIT
key, the display shows:
The current partition (
Part
), song title (
Song
) and amount of time left
on the partition for recording (
RecRem
) in minutes.
Other song operations
Other song operations are described in “Advanced song management” on
page 38.
- -
S o n g
I n f o .
- -
P a r t
:
P a r t 0 1
S o n g
:
M Y B L U E S
R e c R e m :
1 2 6 9
m i n