SoundTraxx Tsunami Steam Technical Reference - Manual (Page 9)

Tsunami Technical Reference Page 7
CV 10
BEMF Cutout
Description
This is used to gradually reduce the effect of the BEMF Control as locomotive
speed is increased. This CV contains a value from 0-127 that corresponds to
the speed step at which the intensity of BEMF control will be reduced to zero.
D0-D7: BEMF Cutout
This CV can alternatively contain a value from 128-255 which will cause
the BEMF intensity to decrease to a percentage between 0 and 50% of the
BEMF intensity set by CV 212 as:
Full Speed BEMF Intensity = (CV 212 – 128)÷128
Default value: 0
Primary CVs
Bit 7 Bit 0
D7 D6 D5 D4 D3 D2 D1 D0