SoundTraxx Tsunami Steam Technical Reference - Manual (Page 3)

Tsunami Technical Reference Page 1
Primary CVs
CV 1
Primary Address Control
Description
Contains the decoder’s primary address between 1 and 127:
Bit 0-6: A0-A6, Decoder Address
Bit 7: Not used. Must be set to 0!
The decoder will process all valid instruction packets containing an address
that matches the value contained in this register when CV 29, bit 5 is set to 0.
Programming this register with a new value will automatically clear the
Consist Address (CV 19) to 0 and clear the Extended Address Enable bit in
CV 29 (bit 5).
The decoder will ignore commands that attempt to program this register with
values outside the range of 1 to 127.
Note that CV 1 can only be changed in operations mode if the extended
address is enabled.
Default Value: 3
Related CVs: See also CV 29, Consist Address, Extended Address
Bit 7 Bit 0
0 A6 A5 A4 A3 A2 A1 A0