SoundTraxx Tsunami Steam Technical Reference - Manual (Page 21)

Tsunami Technical Reference Page 19
CV 22
Consist Function Group 2
Description
Defines which Group 2 functions may be controlled by packets sent to the
decoder’s consist address. Disabled functions may be controlled only from
decoder’s primary or extended address:
Bit 0: F0(f), Function 0, Forward enable Bit
0 = function is disabled for consist operation.
1 = function is enabled for consist operation.
Bit 1: F0(r), Function 0, Reverse enable Bit
0 = function is disabled for consist operation.
1 = function is enabled for consist operation.
Bit 2: F9, Consist Function 9 Enable Bit
0 = function is disabled for consist operation.
1 = function is enabled for consist operation.
Bit 3: F10, Consist Function 10 Enable Bit
0 = function is disabled for consist operation.
1 = function is enabled for consist operation.
Bit 4: F11, Consist Function 11 Enable Bit
0 = function is disabled for consist operation.
1 = function is enabled for consist operation.
Bit 5: F12, Consist Function 12 Enable Bit
0 = function is disabled for consist operation.
1 = function is enabled for consist operation.
Bit 6: Reserved.
Bit 7: Reserved.
This register is useful for differentiating the Headlight and Backup Light
functions in the lead engine of the consist from the other engines. For
example, by setting this register in the lead locomotive to 1 and the same
register in all other engines to 0, only the headlight in the lead engine will be
on and only when the consist is moving forward.
Default Value: 0
Related CVs: See also Consist Address, Consist Function Active.
Primary CVs
Bit 7 Bit 0
F12 F11 F10 F9 F0 (r) F0 (f)