SoundTraxx Tsunami Steam Technical Reference - Manual (Page 52)

Tsunami Technical Reference Page 50
CV 64
Analog Mode Maximum Motor Voltage
Description
Contains a value between 0 and 255 corresponding to the maximum average
voltage Tsunami can apply to the motor when operating in analog mode.
D0-D7: Analog Mode Maximum Motor Voltage
CV 64 may be set to any value between 0 and 255 corresponding to tenths
of a volt. A setting of 180 therefore sets the maximum average motor to 18.0
volts.
CV 64 allows you to set the maximum average voltage that will be applied
to the motor when operating in analog mode. This is useful for limiting a
locomotive’s top speed as well as providing some margin of safety against
burning out a motor whose voltage rating may be lower than your power
pack’s maximum output
Caution: Tsunami only limits the average voltage to the motor. The peak
voltage applied to the motor will still be the same as the track voltage.
Default value: 180
Misc. Control CVs
Bit 7 Bit 0
D7 D6 D5 D4 D3 D2 D1 D0