Speed table cvs, Cv 67-94 loadable speed table, Description – SoundTraxx Tsunami Steam Technical Reference User Manual
Page 54
Tsunami Technical Reference
Page 52
CV 67-94
Loadable Speed Table
Description
The loadable speed table is made up of 28 CVs. Each CV contains a value,
n, between 0 and 255 that specifies the percentage of the maximum throttle
voltage interpreted as n/255 that is to be applied to the motor when the
speed step in use corresponds to that CV.
D0-D7:
Speed Table Data
The loadable speed table may be used in the 14, 28 and 128 speed step
modes. When 14 speed step mode is in effect, the DSD will use a curve
defined by every other speed table value starting with speed step 1.
When 28 step mode is enabled, the DSD will simply use one table value for
each speed step.
When 128 step mode is enabled, the DSD will interpolate 4-5 points between
each speed table entry to build a 128 point curve.
Note that the DSD will not use the loadable speed table until bit 5 in both CV
25 and CV 29 are set to 1.
Default values: The default values provide a linear (straight line) response.
Individual CVs are loaded as follows:
CV
Speed Step
Value
CV 67
(Speed Step 1):
9
CV 68
(Speed Step 2):
18
CV 69
(Speed Step 3):
27
CV 70
(Speed Step 4):
36
CV 71
(Speed Step 5):
45
CV 72
(Speed Step 6):
55
CV 73
(Speed Step 7):
64
CV 74
(Speed Step 8):
73
CV 75
(Speed Step 9):
82
CV 76
(Speed Step 10):
91
CV 77
(Speed Step 11):
100
CV 78
(Speed Step 12):
109
CV 79
(Speed Step 13):
118
CV 80
(Speed Step 14):
127
CV 81
(Speed Step 15):
137
Speed Table CVs
Bit 7
Bit 0
D7
D6
D5
D4
D3
D2
D1
D0