SoundTraxx Tsunami Steam Technical Reference - Manual (Page 35)

Tsunami Technical Reference Page 33
CV 38
F4 Output Location
Description
Maps the F4 function to any of eight DSD auxiliary function outputs as
defined by a 1 in the corresponding bit position:
Bit 0: BEL, Bell Sound Effect
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.
Bit 1: FX5, Effect 1 output
0 = Output is unaffected by F4.
1 = Output is activated when F4 is on.
Bit 2: FX6, Effect 2 output
0 = Output is unaffected by F4.
1 = Output is activated when F4 is on.
Bit 3: DYN, Dynamo Sound Effect
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.
Bit 4: SHW, Short Whistle Sound Effect
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.
Bit 5: STM, Steam Release/Cylinder Cocks
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.
Bit 6: WS, Water Stop
0 = Sound is unaffected by F4.
1 = Sound is activated when F4 is on.
Bit 7: DIM, Headlight Dimmer Function
0 = Lighting outputs are unaffected by F4.
1 = Lighting outputs set up as “Dimmable Headlights”
are dimmed when F4 is on.
Default Value: 32
Related CVs: See also CVs 33-37, 39-46
Function Output CVs
Bit 7
Steam:
Bit 0
DIM WS STM SHW DYN FX6 FX5 BEL
Bit 7
Diesel:
Bit 0
DIM FAN SHH DB FX6 FX5 BEL