SoundTraxx Tsunami Steam Technical Reference - Manual (Page 59)

Tsunami Technical Reference Page 57
CV 112
Sound Configuration 1
Description
This CV is used to configure select sound effects. A 1 in the corresponding
bit position enables the selected sound effect:
Bit 0: AP2, Air Pump 2 Enable
0 = Single Air Pump
1 = Dual Air Pump
Bits 1-3: Reserved.
Bits 4-5: SR1,SR0, Slip Rate Control
00 = Zero Slip Rate
01 = Slow Slip Rate
10 = Medium Slip Rate
11 = Fast Slip Rate
These bits control the variation or timing syncopation
when articulated exhaust is enabled to simulate slipping
drive wheels or a double-header.
Bit 6: AECS, Articulated Exhaust Control
0 = Rod Engine Chuff
1 = Articulated Exhaust Chuff
This bit alters the exhaust timing to sound like a simple
articulated engine when Auto Exhaust is activated.
Bit 7: CAM, Cam Enable
0 = Auto Exhaust Chuff Enable
1 = Cam Synchronized Exhaust Enabled
(DCC mode only, exhaust will be controlled by CV 116
when in Analog Mode)
Default Value: 0
Sound Control CVs
Bit 7
Steam:
Bit 0
CAM AECS SR1 SR0 AP2
Bit 7
Diesel:
Bit 0
RFE ACE