Sloan EW-72000 Installaton - Manual (Page 8)

Item Part Description
No. No.
1 EW-46 Electronics Enclosure 2 Station Machined
2 EW-41 Large Latch (2)
3 EW-27 Screw, Flat Head #10-24 x 1/2” Long (4)
4 EW-75-A Sensor Plate Assembly (2)
5 EW-8 Spacer, #8 x 1” Long (4)
6 EW-13 Mounting Clamp for ETF-370-A Solenoid (4)
7 EW-9 Screw, Truss Head #8-32 x 1-1/2” Long (4)
8 ETF-61 Male Connector (4)
9 ETF-370-A Solenoid Valve Assembly (2)
10 EW-19 Compression Tee Fitting 3/8" Tube
11 EW-89-00362 Tube, 3/8" x 3-5/8” Long (2)
12 EW-89-00188 Tube, 3/8" x 1-7/8” Long (2)
13 EW-18 Compression Elbow Fitting, 3/8" Tube
14 EW-5 Mounting Bracket for Shut-off Valve
15 EW-74 Panel Mount Ball Valve - 3/8" Compression
Fitting
16 EW-36 Screw, Pan Head #8-32 x 7/16” Long (SEMS)(2)
17 EW-89-02525 Tube, 3/8" x 25-1/4” Long
18 EW-89-00388 Tube, 3/8" x 3-7/8” Long
19 ETF-450-A Splash Proof Junction Box Assembly (2)
20 EW-28 Screw, Round Head #8-32 x 1/2” Long (4)
21 † ESD-255-A Manual Soap Pump Assembly
Item Part Description
No. No.
22 † ESD-245-A Manual Soap Reservoir Assembly
23 EW-37 Screw, Truss Head 1/4-20 x 1-1/2” (4)
— EW-26 Tube Support 3/8" (5) (Not Shown)
— MIX-135-A Thermostatic Mixing Valve (Below Deck)
(Not shown)
— EW-87 Flexible Supply Hose, 2 Station (Not Shown)
— EW-82-A Wiring Harness, 2 Station (Not Shown)
— ETF-233 Transformer (Not shown)
— ETF-731 Vandal Proof Key, Standard and Junior
(Not shown)
24 EW-96 T-Handle Hex Wrench, 7/32"
25 EW-48-X Cover, Electronics Enclosure, 2 Station Machined
26 EW-42 Large Encased Receiver (2)
27 EW-27 Screw, Flat Head #10-24 x 1/2” Long (4)
28 ‡ ESD-242 Sleeve for Fill Cap
29 ‡ ESD-241 Fill Cap for Soap Reservoir
30 ‡ EW-11 Gasket - Fill Cap Sleeve (Manual Soap Reservoir)
31 ‡ ESD-243 Jam Nut for Fill Cap Sleeve
— ‡ ESD-249 Fill Cap Spanner (Not Shown)
† Included on models with Soap Dispenser.
‡ Included on models with Fill Cap.
25
28
26
30
29
27
22 31
7
3
2
1
20
21
5
4
24
16
13
17 19 10 15
14
6 11
8
9
12
Parts List
8
23 18
EW-72000 Double Station Head Assembly