Sloan EW-72000 Installaton - Manual (Page 5)

6 Remove Cover from Head 5 Install Grid Strainers and Connect
Drain Line
A
Insert T-Handled Wrench into access holes on left and right
sides of the Head. Turn top of wrench toward front of Head
rotating until it stops to fully open the latch. Remove the Cover.
A
Install Grid Strainers.
Drain Line
Grid Strainer
T-Handle
Wrench
T-Handle
Wrench
B
Plumb drain outlets to wall.
7 Mount Head to Basin
Fastener (4)
5
A
If desired, apply caulk between Basin and Head.
Bead of
Caulk
B
Mount Head to Basin using 1/4”-20 x 1-1/2” Truss Head
Screws.
Bead of
Caulk
Fastener (6)
Triple Station Double Station
1/4”-20 x 1-1/2” Truss Head Screw
(Actual Size)