Skutch Electronics BA-1000-A Vbox - Manual (Page 7)

Version 6.XX Page 7
press:
1 1 1 1
to erase the message,
3 3 3 3
to save the message for
later or
5 5 5 5
to replay the message and hear it again.
* * *
Call in to hear your messages
This is how you can listen to the messages, that callers
have left you, whey you are away from the office; you must
know your PIN to do this.
Call the system from a standard Touch Tone telephone.
After the intro message starts to play, enter
* * * *
, your PIN,
then
# # # #
.
Now the system will play back the Urgent messages.
After each message, you can press:
1 1 1 1
to erase the message,
3 3 3 3
to save the message for later or
5 5 5 5
to replay the message
and hear it again.
When finished, if you have some NON-Urgent messages
on the system, it will Beep 3 times; now enter a
0 0 0 0
within 4
seconds to hear these messages, or just hang up if you want to
leave them for the next day.
If the system was trying to find you because of some
Urgent messages, it will reset when you’ve handled all of the
Urgent ones; so it won’t call you again until the next Urgent call
comes along.
* * *
Call in to Change your Urgent
Phone Numbers
This is how you can call the system, from anywhere, to:
change an Urgent number, add a new Urgent number, turn an
Urgent number on/off or erase an Urgent number; you must
know your PIN to do this.
Call the system from a standard Touch Tone telephone.
After the intro message starts to play, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 second.
Enter your PIN, then
# # # #
.
Wait 1 second.
To hear or change your Urgent phone numbers, press:
1 1 1 1
You’re now at the first Urgent number. You can press
3 3 3 3
to skip to the next number, or
7 7 7 7
to back up to the number
you were just on.
To add or change a number:
For this example we are entering a home phone number,
then a pager phone number.
EXAMPLE: 786-6100 (Home)
To add or change this number press
1 1 1 1
.
Press
3 3 3 3
because it isn’t a Pager.
Enter the number then
# # # #
:
7866100 # 7866100 # 7866100 # 7866100 #
After the Beep, the number has been stored and it is now
on the next phone number spot.
EXAMPLE: 343-2234 (Pager) - Pager to display 1234.
To add or change the number press
1 1 1 1
.
Press
1 1 1 1
because it is a Pager.
Enter the number then
# # # #
:
3432234 *2 1234 # 3432234 *2 1234 # 3432234 *2 1234 # 3432234 *2 1234 #
In the example above, the
*2 *2 *2 *2
is a special code that
says wait for 5 seconds of silence.
After the Beep, the number has been stored and it is now
on the next phone number spot.
To exit, enter:
** ** ** **
.
To turn a number on or off
This is an on/off option for the phone number; the default
is enabled (on). When a number is enabled, it will be called
when an Urgent message is recorded. When a number is
disabled, it will be skipped over when the Urgent calls are made;
the phone number, though, is still in the system.
To change between enabled/disabled, press
0 0 0 0
.
To exit, enter:
** ** ** **
.
To erase a number
To erase an Urgent number, press
1 1 1 1
.
Press
3 3 3 3
to get past the pager question.
Now press
# # # #
to erase the Urgent number and move to
the next phone number spot.
To exit, enter:
** ** ** **
.