Skutch Electronics BA-1000-A Vbox - Manual (Page 8)

Version 6.XX Page 8
• Some Special Codes for your Urgent
Numbers
These are special codes that can be used when entering
your Urgent numbers.
*00 *00 *00 *00
– Dial the next touch tone digit for 5 seconds.
*01 *01 *01 *01
to
09 09 09 09
– Pause for 1 to 9 seconds.
*1 *1 *1 *1
– Wait for return dial tone.
*2 *2 *2 *2
– Wait for 5 seconds of silence.
*3 *3 *3 *3
– Dial a touch tone *.
*4 *4 *4 *4
– Dial a touch tone #
*5 *5 *5 *5
– Dial the rest of the phone number as touch tones.
*6 *6 *6 *6
– Do a “Hook Flash” on the phone line.
* * *
Call in to Change Your Voice
Mail box message
Call the system from a standard Touch Tone telephone.
After the intro message starts to play, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 second.
Enter your PIN, then
# # # #
.
Wait 1 second.
Press:
5 5 5 5
, to start the recorder, then start talking after the
low beep. You can only change the currently selected message.
Press the
* * * *
to stop recording.
To exit, press
* * * *
again.
Sample Outgoing Message
"You have reached Dr. Williams’ Voice Mail. Just leave
your name, number and a brief message, after the tone, and I
will contact you as soon as possible. If this is an urgent call,
dial an 8 after your message and I will be notified
immediately.”
* * *
Call in to Make it Start Waiting
for Calls
This option lets you set the system to take calls, if you
forgot to set the system before you left the office.
Call the system from a standard Touch Tone telephone.
After about 10 rings, the system will ask for your access
code, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 second.
Enter your PIN, then
# # # #
.
Wait 1 second.
Press:
0 0 0 0
to start the system to take calls.
To exit, press
* * * *
.
* * *
Call in to Change the Default
Voice Mail box
This option lets you change which Voice Mail box will get
the message (if a caller doesn’t choose a Voice Mail box). Any
Voice Mail box user can do this, but he must know his PIN.
Call the system from a standard Touch Tone telephone.
After the intro message starts to play, enter:
* 0506 # * 0506 # * 0506 # * 0506 #
Wait 1 second.
Enter your PIN, then
# # # #
.
Wait 1 second.
Press:
8 8 8 8
.
Enter the new Default Box to use for callers that don’t
select a Voice Mail box.
To exit, press
* * * *
again.