Seaward PAT2000i - Manual (Page 5)

FEATURES
DESCRIPTION
The PAT2000i is one of the most advanced portable appliance testers available,
performing nine functions and providing a comprehensive guide to the electrical safety
of 230V, 110V and (with 3 phase adaptor lead) 400V appliances of Class I or ll
construction.
The Instrument is microprocessor controlled and enables the user to select either the
automatic testcode or manual mode of operation which gives control of the testing
sequence to the instruments microprocessor or the operator. Alternatively the
PAT2000i can be controlled by a computer via the RS232 link.
All internal power and test outputs for both all rated appliances are derived from 230v
50Hz supply.
The equipment performs the test selected by the user and records the results in its
internal memory which is capable of storing up to 1000 sets of test results.
To speed up data entry, the appliance number, test code number and user code can all
be entered into the PAT2000i by a bar code reader.
In addition to test results the memory also records the appliance number, the test
number and the date of testing. Selectable preset pass/fail limits have been
programmed into the PAT2000i and the test result is clearly displayed on the
instruments liquid crystal display and on any hard copy printout.
A fully charged battery backed memory will store results for up to six months without
being reconnected to the supply for re-charging, however it is recommended that the
contents of the memory is printed out or down loaded to a PC daily.
The PAT2000i performs tests to levels and thresholds as described in the IEE
publication:
”CODE OF PRACTICE FOR IN SERVICE INSPECTION AND TESTING OF
ELECTRICAL EQUIPMENT”.
This code of practice details the testing required for electrical equipment that is “IN
SERVICE” as well as testing required by “AS NEW and REPAIRED” equipment.
Particular features of this product are:
• Testing to IEE recommended new / service levels.
• Dual voltage output.
• Rugged Enclosure.
• Compatibility with PATS & PATS+ software.
• Bar code reader input.
• Remote control facility.
• IT Test facility
• IEC Lead test
PAT 2000i Portable Appliance Tester
2
PAT 2000i Booklet 7/3/03 4:26 pm Page 3