Seaward PAT2000i - Manual (Page 4)

THE
INTEREST
OF SAFETY
THlS INSTRU
MENT SHOULD ONLY
BE USED BY COMPETENT
SUITABLY TRAINED PERSON
NEL AFTER DUE CONSIDERATlON
OF ANY HAZARD INVOLVED
SAFETY
Read instructions before use.
Due to the potential hazard associated with any electrical circuit it is important that a
user is familiar with the instructions covering the capabilities and operation of this
instrument. The user should ensure that all reasonable safety precautions are followed
and if any doubt exists should seek advice before proceeding.
The PAT2000i performs a number of electrical tests which involve high voltages and
high currents. Never touch the appliance being tested while the testing procedure is
being followed.
This product is designed for use by suitably trained competent personnel.
Symbols used on this equipment.
- Equipment protected throughout by double or reinforced insulation.
- Caution risk of electric shock (Test voltage of 1500 V AC may be present).
- Caution (refer to accompanying documents).
GETTING STARTED.
• On receiving your tester:
• Read the instructions.
• Assemble tester with interconnection lead between keypad and main unit.
• Plug in tester and leave for a maximum 16 hours to charge backup battery.
• Clear Memory.
• Set computer and printer communications.
PAT 2000i Portable Appliance Tester
1
PAT 2000i Booklet 7/3/03 4:26 pm Page 2