RJS Inspector D4000 Auto Optic (FIRMWARE version A.05 and Earlier) - Manual (Page 9)

Operator
’
s Guide Inspector 4000
™
002-5564 RJS, Minneapolis, MN 2
1.5 Documentation Updates
RJS strives to provide the best possible documentation. This manual, or any of our
manuals , may be updated without notice.
1.6 Copyrights
The copyrights in this manual are owned by RJS. All rights are reserved. Unauthorized
reproduction of this manual or unauthorized use of the software may result in
imprisonment of up to one year and fines of up
to $10,000 (17 U.S.C.506). Copyright
violations may be subject to civil liability .
1.7 Unpacking and Inspection
Carefully unpack the components and save the container. If the container is crushed,
punctured or water damaged you can use the container to prove a claim against the
carrier. RJS is not responsible for transportation damage .
Your Inspector 4000 is packaged in a custom made container. After removing the unit from the
shipping box make sure you have:

Main display unit

Auto-optic scan head and cable

Four size AA batteries

Operator’s manual

Bar-code “test” symbol sheet
1.8 Installing Batteries
Slide open the plastic cover on the back of the unit. Position the cloth battery “pull strip”
down then insert 4 (included) batteries according to the positive/negative markings.