RJS Inspector D4000 Auto Optic (FIRMWARE version A.05 and Earlier) - Manual (Page 50)

Operator
’
s Guide Appendix D
002-5564 RJS, Minneapolis, MN 43
Figure C-1
INSPECTOR 4000
Revision D
Single Scan Analysis
Code 3of9
*R*
Scan Profile Analysis
Reference Decode ................... A
Decodability ........................... 76% ..... A
Symbol Contrast ..................... 93% ..... A
Refl (Min)/Refl (Max) ............ 07% ..... A
Edge Contrast (Min) ............... 57% ..... A
MODulation ............................ 61% ..... B
Defects .................................... 05% ..... A
Application Compliance ......... A
Overall Symbol Grade
B/10/660 3.0/10/660
Traditional Analysis
Acceptable
-100% Tol. +100%
---------------++AR++++
Wide/Narrow Ratio ................. 2.3 PASS
Print Contrast signal ............... 92% PASS
Required PCS ......................... 75%
Element Refl. (Max) ............... 92% PASS
Reflectance (Min) ................... 07% PASS
Pall/Fail Analysis
Passing Grade Selected ........... ............ D
Final Results ........................... *PASS*
Grade B, using a 10 mil
aperture and 660nm
wavelength of light
See Appendix K,
(Barcode definitions)
See Appendix K,
(Barcode definitions)