RJS Inspector D4000 Auto Optic (FIRMWARE version A.05 and Earlier) - Manual (Page 37)

Operator
’
s Guide Inspector 4000
™
002-5564 RJS, Minneapolis, MN 30
Press Select to display the next screen:
Defects 07% A
Appl. Compl. A
The defects value is displayed on the top row. The application compliance grade is
displayed on the bottom row (A or F).
If any symbology parameter such as mod check, ratio, character type or inter-character
gap is analyzed and found in error, an “F” grade will be given, and this will affect the
overall symbol grade (per the ANSI specification).
Press Select to display the next screen:
Grade A/06/660
4.0/06/660
This screen shows:

The ANSI symbol grade (two formats shown).

The aperture diameter in mils (6 thousands inch in sample).

The wavelength in nanometers (660, indicating red, in sample).