RJS Inspector D4000 Auto Optic (FIRMWARE version A.05 and Earlier) - Manual (Page 28)

Operator
’
s Guide Inspector 4000
™
002-5564 RJS, Minneapolis, MN 21
Table 8-A (Code Identifiers Inspector 4000 )
LOGMARS Code 39 Symbology
AIAG B-1 Code 39 symbology
AIAG B 3/4/5 Code 39 symbology
ANSI 3 of 9 Code 39 symbology
HIBC 3 of 9 Code 39 symbology
ANSI W/43 Code 39 symbology
USS 3 of 9 Code 39 symbology
ANSI I 2 of 5 Interleaved 2 of 5
UPC CASEC Interleaved 2 of 5
USS CODABR USS Codabar
ANSI CODAB ANSI Codabar Variant
USS C93 USS Code 93
ANSI C93 Code 93
USS C128 USS Code 128
ANSI C128 Code 128
X - Y % UPC-A Uniform Product Code, Ver. A
X - Y % UPCA+2 Uniform Product Code, Ver. A with 2 digit addendum
X - Y % UPCA+5 Uniform Product Code, Ver. A with 5 digit addendum
X - Y % UPC-E Uniform Product Code, Ver. E
X - Y % UPCE+2 Uniform Product Code, Ver. E with 2 digit addendum
X - Y % UPCE+5 Uniform Product Code, Ver. E with 5 digit addendum
X - Y % EAN-13 European Article Number 13 digit
X - Y % EAN13+2 European Article Number 13 digit with 2 digit
addendum
X - Y % EAN13+5 European Article Number 13 digit with 5 digit
addendum
X - Y % EAN-8 European Article Number 8 digit
X - Y % EAN8+2 European Article Number 8 digit with 2 digit addendum
X - Y % EAN8+5 European Article Number 8 digit with 5 digit addendum
Note: (Previous Tables)
All ANSI symbologies are traditional specifications using bar width deviation.
X and Y represent the magnification range selected for UPC/EAN tolerances.