RJS Inspector D4000 Auto Optic (FIRMWARE version A.05 and Earlier) - Manual (Page 8)

Operator
’
s Guide Inspector 4000
™
002-5564 RJS, Minneapolis, MN 1
1.0 Preface
1.1 Proprietary Statement
The RJS Inspector 4000 Operator’s Guide contains proprietary information of RJS. It is
intended solely for the use of parties operating and maintaining the equipment described
herein. This information may not be used, reproduced , or disclosed to any other parties
for any other purpose without the express written permission of RJS.
1.2 Statement of FCC Compliance: USA
The equipment described in this manual has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide a reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with this
operator’s manual, may cause harmful interference to radio communications. Operating
this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the problem at his own expense.
1.3 Statement of FCC Compliance: Canada
This Class A digital apparatus meets all requirements of the Canadian interference-
Causing Equipment Regulations.
Cet appareil numénque de la classe A respecte toutes les exigences du Règlement sur le
maténel brouilleur du Canada.
1.4 CE:
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this operator’s manual, may cause harmful
interference to radio communications. Operating this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
problem at his own expense.