RJS Inspector D4000 Auto Optic (FIRMWARE version A.05 and Earlier) - Manual (Page 31)

Operator
’
s Guide Inspector 4000
™
002-5564 RJS, Minneapolis, MN 24
Press Select to bring up the next screen:
Ratio: 2.9
This screen provides the ratio calculation result on the top row (when applicable) and
the decodability calculation and grade on the bottom row. If Ratio is not appropriate
(UPC, EAN, Code 93 or Code 128), the Ratio field will be blank.
The following displays are brought up by pressing Select. The first screen to display
is the Decoded Symbol Data:
*1234ABCDEF456*
01 Scans Remain.
(“Scans Remain” will display if more than “Single” scan was selected in the Setup.)
The decoded symbol data displays. (If more than 16 characters are present, those
characters will wrap to the next row of the display. If more than 32 characters are
present, press Select to scroll through the remaining data.)
Note: Code 128 is displayed in sixteen columns of two alphanumerics each. Each column represents a
decoded Code 128 symbol character. Two 16 column fields are used to represent a 32 character
decode. Press Select to display the second field. See Appendix A for details regarding display of
Code 128 on Data Analysis Screens.