RGBLink VSP 3500 User Manual - Manual (Page 99)

6. System Setup and Operations
How to rotate layer image?
VSP 3500 User Manual 99
How to rotate layer image?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. Press MENU key, choose 【LAYER CONFIG】 option:
2. Press NEXT, and enter to Layer A:
3. Press NEXT again, and enter SET ROTATE:
4. Press NEXT, choose SET ROTATE, rotate LEFT/RIGHT knob to
choose rotate mode;
5. LCD panel shows rotate mode, VSP 3500 provides 2 kinds of rotate
modes for user, that is image rotate to left or right.
Note
Rotate effects setting is only for Layer A, and
are invalid for other layers.
VSP 3500
*LAYER CONFIG >>
LAYER CONFIG
*LAYER A >>
LAYER A
*SET ROTATE >>