How to set the position of layer image, System setup and operations – RGBLink VSP 3500 User Manual User Manual

Page 93

6. System Setup and Operations

How to set the position of layer image?

VSP 3500 User Manual 93

Firstly, ensure the equipment is on power and run normally. For details,

please refer to:

Button operation is as follows:

1. In CUSTOM ADJUSTMENTS area, press 【Position】 key, key lights,

and start the set the position of layer image function;

2. In LAYER area, press any bright key of A, B, C, D (keys light are

optional), key lights, and it can be edited;

3. Rotate left/right knob to adjust window level position, and rotate

up/down knob to adjust window vertical position;

4. LCD screen displays the value;

5. Press 【Position】 key again, key lights is off and close the set the

position of layer image function.

POS X: 0
POS Y: 0