RGBLink VSP 3500 User Manual - Manual (Page 100)

6. System Setup and Operations
How to save the current setting parameters?
VSP 3500 User Manual 100
How to save the current setting
parameters?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
When VSP 3500 function setting is finished, VSP 3500 provide 10 save
modes to avoid setting again when you use the same function or set again
after restarting because of power out.
1. Press 【SAVE】 key, key lights, and meanwhile button 0~9 light, start
the save option:
2. Choose the corresponding position and save. SAVE TO 1 ~SAVE TO
9 corresponding button 1~9, SAVE TO 10 corresponding button 0.
For example, choose SAVE TO 1, LCD panel shows as follows:
SAVE TO 1
SAVE FINISH
SAVE
>SAVE TO 1~10