RGBLink VSP 3500 User Manual - Manual (Page 87)

6. System Setup and Operations
How to change the output resolution?
VSP 3500 User Manual 87
How to change the output resolution?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: H ow to determine equipment run normally ?
Button operation is as follows:
1. VSP 3500 provides 12 kinds of common output formats for user;
2. Click【MENU】key, key lights;
3. Set LED panel scan menu, rotate UP/DOWN knob to select OUTPUT
CONFIG;
4. Press【NEXT】to enter the menu, rotate LEFT/RIGHT knob to select
COMMON FORMAT;
5. Press【NEXT】 to enter to the menu, rotate LEFT/RIGHT knob to select
output resolution;
6. Press 【NEXT】 to set, that is, to realize the operation of changing
output resolution.
VSP 3500
*OUTPUT CONFIG >>
OUTPUT CONFIG
*COMMON FORMAT >>
COMMON FORMAT
>1920x1080x60 <>