RGBLink VSP 3500 User Manual - Manual (Page 108)

VSP 3500 User Manual 108
C. Upgrading Software
Main board MCU program upgrading steps
Decompression and install upgrade file:
Install USB upgrade file: find
in Dfuse, and install to the system default directory.
You also can choose by yourselves. ( You can install
DfuSe_Demo_V3.0.2_Setup.exe if the computer system is 32 bit
system, and you can install DfuSe_Demo_V3.0.2_Setup_amd64.exe if
the computer system is 64 bit system）.
Using USB interface upgrade methods: connect USB interface and
computer interface by USB line, as shown in figure:
Upgrade the two dial switch next to the LAN port::