beautypg.com

Led display only displays part of the image, Signal needs to scale, No display in the second half part of led display – RGBLink VSP 168HD User Manual User Manual

Page 93: Resolution is insufficient, Left screen appears two black sides, Adjust de deviation

background image


VSP 168HD User Manual 93

LED Display Only Displays Part of the Image

Signal Needs to Scale

Push [SCALE] button in the processor and knob to adjust the actual screen

size of the screen, including the "V Size", "H Size", ―V Pos‖, ―H Pos‖ and

"Reset", the push the knob to confirm.

No Display in the Second Half Part of LED Display

Resolution is Insufficient

Please make sure the points of the screen width and height, choose the

resolution that bigger than screen width by push button [MENU] and

choose OUTPUT FORMAT, then push the knob to confirm.

Left Screen Appears Two Black Sides


Adjust DE Deviation

Adjust the DVI output and DE migration of the processor, push the [MENU]

button, choose "OUTPUT" and find the corresponding output name, such

as "DVI1 OUT ADJUST", and find "DVI1 DE" again, make an adjustment

for corresponding horizontal and vertical DE, please remember to save to

the corresponding channel after setting up, save to SAVE1 by default.

This manual is related to the following products: