RGBLink VSP 168HD User Manual - Manual (Page 80)

6. System Setup and Operation
How to Realize Single Image Switching
VSP 168HD User Manual 80
How to Realize Single Image Switching
Boot the system default CV1 to the current input source, if need seamless
switching other source such as VGA, push VGA button, LCD module show
as follows:
CV1 button light turns off after pushing VGA button. VGA button light is on if
the VGA signal is effective and stable. And if the VGA signal is invalid or no
input, DVI button light will flash.
Note
Seamless switch: means signal switch will not
appear any flash point, black, shaking or delay
SOURCE SELECT:
>VGA