RGBLink VSP 168HD User Manual - Manual (Page 41)

4. MENU Orientation
MENU
VSP 168HD User Manual 41
Details please refer to the instructions in the manual: How to Do
customized Resolution .
OUTPUT ADJUST: Output adjust menu, including sub-menu as follows:
DVI MODE: Can set the protocol as HDMI or DVI, default is DVI output,
HDMI signal output will enable when HDMI option checked.
BIT DEPTH: Bit depth setting, system default as 8 bit for DVI signal, user
need not set it. And system default as 10 bit, user can also choose 8 bit or
12 bit.
DATA RANGE: DVI out range adjustment can choose RGB or YCBCR
among them the RGB adjusting range is between 0-255, YCBCR adjusting
range from 16 to 235.
DE ADJUST: DE adjust, the sub-menu as following:
DE ON/OFF: Can choose to open or closed when choose open, it can be
adjusted to DE, as follows:
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
When the signal source of the screen appear black side, can use this
function adjustment, make the image to full screen display.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
Note
Only comments to professional operator.
SCALE: It can adjust the image scale size and image position settings
including as follows:
H SIZE: Width setting.