beautypg.com

Menu orientation – RGBLink VSP 168HD User Manual User Manual

Page 45

background image

4. MENU Orientation

MENU

VSP 168HD User Manual 45

the image is the graphic content pixel, otherwise, it is the graphic

background pixel. It should combined with "AND/OR" conditions when

judging.

BELOW: In image 2, if the pixel value is lower than the setting value, then

the image is the graphic content pixel, otherwise, it is the graphic

background pixel. It should combined with "AND/OR" conditions when

judging.

AND/OR:

AND: All

―Red, Green, Blue‖ value must meet ABOVE or BELOW

conditions.

OR: Any one of

―Red, Green, Blue‖ value should meet ABOVE or BELOW

conditions.

RED: Red limit, cut-off point condition of ABOVE and BELOW condition in

red channel, the range is 0 ~ 255.

GREEN: Green limit, cut-off point condition of ABOVE and BELOW

condition in green channel, the range is 0 ~ 255.

BLUE: Blue limit, cut-off point condition of ABOVE and BELOW condition in

blue channel, the range is 0 ~ 255.

For details, please refer to the instructions in the manual:

How to Realize

the Text Overlay Setting.

DISPLAY MODE:

MODE: Image mode selection, user can choose different output modes

according to their requirement, such as: black screen, live image, freeze

image, flat image, test pattern.

TEST PATTERN: Test pattern setting, turn the knob, there are 1 to 66 kinds

of modes for choose.

Notice: When the input comes from DVI, VGA, or SDI (input format is

progressive only), the TEST PATTERN function will be enable and ready to

operate.

This manual is related to the following products: