RGBLink VSP 168HD User Manual - Manual (Page 82)

6. System Setup and Operation
How to Set up the Size and Position of the Single Image
VSP 168HD User Manual 82
How to Set up the Size and Position of the Single Image
1. Push [MENU] button to enter the menu items.
2. Turn the knob, choose .
3. Push the knob to confirm, turn the knob again, choose .
4. Push the knob to confirm, and enter to the items, turn the knob,
user can adjust the following items by knob or number buttons.
5. If image quality distorts by improper operation, it can be recover by reset.
>INPUT >>
OUTPUT >>
INPUT >>
>OUTPUT >>
>H SIZE 1920
V SIZE 1080
OUTPUT ADJUST >>
>SCALE >>
>H POS 0
V POS 0
>RESET