RGBLink VSP 168HD User Manual - Manual (Page 100)

VSP 168HD User Manual 100
(2) Plug in the power cord, and make sure the device is in normal operation.
(3) Push MENU button, and enter [USB UPDATE] option, operation steps are:
MENUSYSTEMUSB UPDATASEL.
(4) Open the USB drive that plug into the computer, and delete the "firmware. Bin" file in
the USB drive, then copy the MCU file "VIDEO.fvb" of VSP168HD to the USB
drive, program loading is complete after the file has been copied.
(5) Restart the device, and enter the menu to check if the version is right, factory reset is
completed. Operation steps are: MENUSYSTEMSYSTEM INFOMCU VER.