Sdi output, Hdbaset output, Dvi output – RGBLink VSP 168HD User Manual User Manual
Page 29: Dvi +vga dvi output, Switch and power, 14：power, Hardware orientation, 14 ： power
2. Hardware Orientation
VSP 168HD Back Panel
VSP 168HD User Manual 29
6: SDI Output
Connect to the device with SDI input.
7: HDBaseT Output
RJ45 interface. Connect one end of the CAT5e or CAT6 cable to RJ45
interface, and the other end to HDBaseT input interface of MSP 215
extender.
12: DVI Output
Connect to the monitor or LED screen with DVI interface.
(This DVI connector does not support hot-plugging).
13: DVI +VGA DVI Output
DVI +VGA output via DVI connector connect to the monitor or LED display
with DVI interface. (This DVI connector does not support hot-plugging).
DVI +VGA, VGA output connector can be connected to monitor or projector
which has VGA interface.
Note
Switch and Power
14：Power
AC 85-264V 3.8A 50/60Hz IEC-3 Power Interface.
Via
adapter, can connect with
DVI-based or VGA-based equipment, and via
DVI to VGA adapter, can output VGA only.