3g-sdi input, Sdi loop out, Cvbs input – RGBLink VSP 168HD User Manual User Manual
Page 28: Vga input, Hdmi input, Hdmi loop out, Output, Fiber output, Hardware orientation, Hdmi
2. Hardware Orientation
VSP 168HD Back Panel
VSP 168HD User Manual 28
It includes 1 3G-SDI input (SDI module), 1 CVBS input by BNC port), 1
HDMI (compatible with DVI), 1 VGA input by DB15 interface (compatible
with YPbPr).
3: 3G-SDI Input
SDI input, input video signal from HD camera and radio processing
equipment, connect SDI interface via 75 ohms impedance BNC port.
4: SDI Loop Out
SDI loop out. Connect to the SDI input of the next level VSP 168HD or the
device with SDI input.
8: CVBS Input
CVBS input, input standard video signal from players, cameras etc.,
supported resolution 480i and 576i via BNC. Supported standards include:
PAL, NTSC and SECAM.
9: VGA Input
VGA input, input the video signal from HD player and Computer, etc.
compatible with YPbPr signal, input signal via the DB15 interface.
10: HDMI
Input
HDMI input interface. Input the image signal from computer.
11: HDMI Loop Out
HDMI Loop Out. Connect to the HDMI input of the next level VSP 168HD or
the device with HDMI input.
OUTPUT
5: Fiber Output
LC interface, use single mode twin-core fiber or multimode twin-core fiber.
Connect one end of the fiber cable to LC interface, and the other end to
fiber input interface of MSP 214 extender.