RGBLink New Driver 2 Quick Start - Manual (Page 3)

Address：S602-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
2
Product Introduction
New Driver 2 controller is the only piece of
equipment between the video source and your
LED screen. The New Driver 2 takes digital video
through HDMI and DVI inputs, where HDMI is the
first priority, when HDMI signal is lost, it will auto
switch to the DVI.
New Driver 2 is compatible with LINSN TS 802
and Colorlight T7. Compare with normal RJ45
connector, New Driver 2 controller use an
etherCON soft-patched connectors so as to
make sure lock connection and better protection
for the CAT5 cable.
New Driver 2 also comes with the EDID
management function, and integrates with the
display connection, brightness adjustment and
GAMMA correction functions, so the New Driver
2 can work totally standard without laptop or PC.
System Connection
RGBlink offers solutions to
demanding technical problems.
Any application questions, or
required further information,
please contact with our
customer Support Engineers.
New Driver 2 Controller System Connection Diagram